The banjo neck heel radius is a subtle detail that makes all the difference. Nearly all stringed instruments have the neck attached at an angle. Fiddles, cellos, guitars, and yes, even banjos have a small angle built into the neck/body joint. This small angle allows for adjustment to take place.Continue Reading
Be very sure of your measurements before you drill this hole. It may be helpful to look back at the Dowel Stick post. The dowel stick hole can be drilled either before or after the neck has had its radius cut. It is typically drilled using a jig with theContinue Reading
When making a banjo fingerboard I ask myself two questions. What kind of material will the fingerboard be made from? Will it have frets? There are lots of options for fingerboard materials. Ebony is the traditional material of choice for fingerboards. Rosewood is a popular choice as well. There areContinue Reading
In the case that the peghead surface of the neck blank is less than 3″ wide, put some ears on the peghead to make it a little wider. The ears are small pieces of wood that are the length of the peghead, the thickness of the peghead, and as wideContinue Reading
Banjo neck reinforcement makes long-term stability and playability much more likely. There are different ways to reinforce a banjo neck. I use 1/8″ thick by 1/2″ wide hot rolled steel bar stock to reinforce my necks. It can be found at most hardware stores. Some builders prefer to use trussContinue Reading
In its most basic representation the banjo neck side profile pattern consists of three rectangles; one for the peghead, one for the neck, and one for the heel. The scale length of the instrument determines how long the neck should be. If you haven’t thought about the scale length ofContinue Reading
The banjo is an incredibly flexible and resilient instrument. It takes on a wide variety of physical forms and can be found to produce a wide variety of sounds and music. A banjo may be constructed from a wooden spoon, a soda can, and a piece of thread. Yet again,Continue Reading
The banjo’s tailpiece, as the name suggests, attaches at the tail of the instrument. It provides a way to attach the strings at the tail of the instrument. The tailpiece can take a variety of forms. Different types of banjos have different types of tailpieces. Some of the banjos IContinue Reading
A banjo’s tone ring filters out some tones from the string and head, allowing others to come through. It’s kind of like an equalizer. The banjo’s strings are the main energetic drivers of the instrument. Their sound is amplified by the head. The head’s ability to amplify the string’s energyContinue Reading